When the rain starts raining do you relax on your couch and listen with excitement as it falls or do you take buckets and start mopping water that leaks from your Edmonton windows? If you take buckets, then this is the right time you should change your method and relax comfortably in your home.
Rainwater is not only disgusting, but it can cause severe structural and aesthetic damage to your home. It can lead to higher heating and cooling costs in your home. So, it is highly recommended that you address the problem of leaking Edmonton windows immediately you notice the problem. By sparing some time to inspect your home and take the necessary steps, you can minimize the risks of unnecessary repairs.
Why Do Your Windows Leak?
Leaks are common occurrences, especially in old homes. After years of being subjected to extreme weather conditions such as rain, storms, and cold, windows become less airtight and watertight. These conditions compromise the standing of the frames and the glazing seals.
However, water leaks don’t happen in aging windows only; it also occurs in new windows in Edmonton. Generally, these are the three main things that may cause water leaks.
Failure to have overhangs to direct water off the roof and prevent wind-driven rainwater from getting through the Edmonton windows.
Poorly angled fascia board on top of the window can also cause water leaks. The fascia board ought to be angled outward in order to direct water far from the windows.
Inadequate installation of the flashing can cause water infiltration. Besides utilizing house wraps or papers rather than specially designed window flashing makes water infiltrate behind the covers and get into the wall area near the windows.
Old and broken caulking at the seams and window flakes can allow water in your windows. A damaged glazing putty allows condensation to infiltrate into the windows. This happens especially in double-hung windows.
Failure to use paint seal can also lead to water leaks in your windows, Edmonton.
How to Identify Where the Leak Is Coming From.
To know why your windows are leaking, it is essential first to establish the origin of the leaking.
Leaks that occur above, around or below the windows implies that there is a gap or crack somewhere in the wall that is letting water in and making it run along the window studs. But this gap might not necessarily be around the windows.
In old structures, leaks in most cases happen on the upper floors or around the roof. Unfortunately, it is hard to know the origin of these water leaks without getting rid of the whole window. While your walls may appear new and in right conditions, they could be experiencing rot or mold growing all the up to the top.
If you can see water leaks in the part where the sash of the window joins the jamb, or on the window frame, the probability is that the issue is in the window.
In old windows, this could be caused by wear and tear from many years of opening and closing the window, or the failure of the window seal. It could also be due to deterioration of the window over a long period. It could also be caused by something insignificant such as blocked drainage channels or worn-out weather-stripping.
How to Fix Window Leaks.
Generally, there are myriad ways you can use to fixe Edmonton windows leaks since these leaks are as a result of different causes.
To fix water leaks in your windows, you can use simple maintenance tips such as;
- Get rid of the damages caulk and re-caulk your windows Edmonton.
- Ensure the bottom sill of the frame is fixed downwards so that it directs water to the exterior rather than to the interior of your home.
- Get rid of debris, animal dug, and dirt from the weep holes in the bottom of the window frame. You can utilize a wire to unplug the holes. This will give way to water that drips drain to the outside rather than accumulating and infiltrating into the interior of your windows.