Blinds for windows have been around for centuries, and no matter where you go, you’ll see blinds installed to keep the UV rays from the sun outside. Blinds can bring a lot of character to any home you see them in, and with so many different colors and designs of blinds to pick from, people can use blinds to show a bit of their personality. Window blinds are also an effective way of complementing the design and decor of your home. Certain colors work better than others, and it helps to do a bit of research to figure out what colors work best with certain interior designs. Window installation in Dawson Creek is something that can add a lot of natural light to your home, and what better way to be able to control how much natural light gets in than installing some blinds?

An important benefit of window blinds is increased energy efficiency. There are many different types of blinds on the market today, with some providing better insulation than others. With a good set of blinds on your windows, you can effectively prevent the heat from getting inside your home on the scorching, hot days of summer. Blinds can also keep the warm air inside your home during the winter. Properly fitted blinds will have your home looking more organized and aesthetically appealing.

Window blinds are available in many different shapes and sizes. They are also highly customizable, and that makes them perfect for people that need to get the exact fit for their customized windows. Measuring your windows in order to get the best-fitting blinds requires a bit of research, and it always helps to have some handy tips at your disposal to expedite the process.

Do You Need Inside Or Outside Mounted Blinds?

One of the first things you need to consider is if you need to get inside or outside mounted blinds.

Outside Mounted Blinds

With outside mount blinds, you’ll be installing them on the outside of the window frame. If you install the bracket for the blinds higher, then you’ll cause the windows to look a bit taller than they really are by the optical illusion it creates. Sometimes outside mounts are the best option to go with. Ideal scenarios where you’d want to install outside mount blinds are:

If you’re wanting the blinds to be bigger than the windows for a full blackout of the light

  • If you’re wanting to cover up windows with one large piece
  • If there isn’t much depth on your window frame that can keep the bracket supported
  • If your bracket doesn’t fit properly on your window frame in a horizontal fashion

Brackets are usually screwed right to the wall that’s located above the frame of the window with outside mount blinds. If you don’t have an ideal amount of space to install the bracket on the wall, you can also install the brackets on the ceiling. This option isn’t the most recommended one to go with, but it works in a pinch.

Inside Mount Blinds

With inside mount blinds, you’re installing the top part right inside the window frame. The nice thing about inside mount blinds is that your windows will be looking more organized and clean. With inside mount blinds, you’ll fasten the bracket to the top part of the window frame.

Errors To Avoid

There are a couple of tips to keep in mind when you’re taking your measurements for your blinds.

  • Don’t measure old blind instead of measuring the window frame
  • Don’t assume that windows that look the same are the same size
  • Don’t only use a soft measuring tape instead of a steel one
  • Don’t bend the measuring tape when you get to the corner

What’s The Process To Measure Blinds?

There are a number of steps you’ll want to take when measuring your blinds:

Measuring The Space For The Bracket

In order to get the most accurate measurement to fasten your blinds on the wall, you’ll want to get a steel tape measure and take a measurement of the entire space that’s available. Write this measurement down.

Measure Your Width

If you’re looking for a full blackout effect, add an additional two inches when you’re taking your measurement at the top of the window. If you have windows that are beside each other, make sure that you provide an extra two inches of space between the measurements. Doing this will ensure that your blinds won’t overlap each other.

Measuring Your Height

Outside mount blinds provide a little more flexibility with where you’ll be installing your brackets. If you decide to install your brackets higher up, then this will create an illusion of tall windows. Get your tape measure and measure the area between the brackets and the lowest part of the window. Add three inches to the measurement and write it down.

Figure Out What Blinds You Want

After you’re done taking your measurements, you can now shop around for blinds that you think might look good on the windows. Always keep in mind the sizes of the brackets you’re using for your blinds.

The window installation in Dawson Creek is one of those things that people only have to consider once in their lives. Windows are designed to last a long time, and because of that, you’ll want to do as much research as you can into what types of windows you’re going to be purchasing for your home. Windows also aren’t cheap, so you won’t want to blindly and quickly choose windows that you might later regret down the road. Energy efficiency is a huge benefit of getting new windows, and if you decide to sell your home later on down the road, you’ll also enjoy the benefits of increased resale value.

Hiring HTR Windows and Doors to do your window installation in Dawson Creek is a wise decision to make. They are a reliable window contractor that provides honest and upfront pricing for some of the best windows on the market. The windows that HTR Windows and Doors install all have the Energy Star sticker on them, and this means that they have passed all of the testing required to deem them energy-efficient.