iPhone boot loop problem is annoying you? Let us find the easiest solutions to quickly fix iPhone stuck in the boot loop. Sometimes, you can solve this issue with a simple reboot.
Many iPhone users encounter the iPhone stuck in boot loop problem. It is one of the most common issues which iPhone users face. It is pretty frustrating that your device gets stuck in an endless restart process. In this, you will see the Apple logo on your device for a few seconds, and after that, your screen goes blank. Furthermore, this process keeps on repeating.
This problem can occur in any iPhone at any time due to various reasons. A reboot loop usually happens when your device tries to startup but is unable to complete this process. Suppose you encounter the same issue; there is then no need to worry. There are various possible solutions to this problem. So, let us learn about its causes and troubleshooting process.
Part 1: Why Does My iPhone Keep Rebooting?
If your iPhone keeps restarting the loop, you may like to know the reasons behind this. Mostly, the reboot loop issue occurs due to various hardware or soft software-related problems. Some of them are listed below:
Failed iOS Update
Sometimes, you start updating iOS software, but the update process gets interrupted for different reasons. In such a case, an iPhone boot loop problem may occur. Even after updating the device, this issue may occur.
Bad Jailbreaking
If you jailbreak an iPhone, there are endless malware attacks possibilities. As a result, iPhone 11 stuck in boot loop problem occurs. So, it would be best to avoid downloading tools or applications from unreliable sources or platforms.
Unstable Connection
While updating or data backup with iTunes, you may encounter an issue with the connection. So, the unstable connection may cause your progress to get stuck halfway.
- Hardware
Sometimes, your iPhone gets damaged by water. Or if there is bad hardware functioning, like a broken component. Then, the reboot loop issue may occur.
Malfunctioning Battery Connector
There might be a problem with the battery connector. They can malfunction, especially in old devices. As a result, your device does not get enough power, which leads to the boot loop.
iPhone Getting Locked
Your iPhone may get locked sometimes when you restart it after iCloud/ Apple ID bypass. This may cause iPhone to get back the boot loop.
Part 2: 6 Methods to Fix iPhone Stuck in Boot Loop.
When you troubleshoot the boot loop, your iPhone problems might get worse. Moreover, you may not get store the data. Therefore, it would best to ensure that you always have your iPhone on a computer. Spare some time to back up your device to the system or iCloud. Now let us learn about different fixes for iPhone stuck in the boot loop.
Fix 1: Force Restart the iPhone
One of the most common tricks to fix the iPhone stuck in boot loop issue is to force restart the device. To begin with, press and release the Volume up button quickly. Similarly, tap the Volume down button and release it. Next, press on the“Power button/ Side button” until you see the Apple logo on the screen. Lastly, release the Side button to restart the device.
Fix 2: Update the Latest Version of iOS
If your iPhone gets stuck in a restart loop, you can repair it by updating the latest version of iOS. The following are the steps to correct the latest iOS version:
Step 1: Launch iTunes on the system.
Step 2: Connect your iPhone to the system using a USB cable.
Step 3: Go to the “Summary” tab in the left panel and click on it.
Step 4: Opt for the option “Update/Check for Updates.”
Step 5: You will see the prompt window on the screen. Click on the “Update” button to install the latest version of iOS on the phone.
Fix 3: Restore your iPhone in Recovery Mode
Mostly, you can restore your iPhone in recovery mode and get the iPhone power cycle loop fixed back to normal. However, this will erase the iPhone data. Therefore, always ensure that you have a backup of your device. Further, you can proceed by following the steps listed below:
Step 1: Switch off your iPhone.
Step 2: Connect your iPhone to the system with the USB cable.
Step 3: Launch iTunes on the computer and make sure that you have the latest iTunes version installed on the computer.
Step 4: Tap and release the Volume up button. Then, press the Volume down button quickly. It will turn off your iPhone
Step 5: Tap and hold the “Side /Power” button until you see the “Connect to iTunes” on your screen. Then, let it go.
Step 6: Next, the iPhone will get in recovery mode.
Step 7: You will see a notification from iTunes to restore or update the iPhone. Then. Click on the “Restore” option to fix the iPhone stuck in boot loop issue.
Fix 4: Reset All Settings
Sometimes, issues with settings can cause iPhone boot loop issues. So, you can resolve it by resetting all the settings. Here are the steps to reset the factory settings
Step 1: Go to the iPhone Settings.
Step 2: Click on the “General” tab. Then, tap on the “Reset” option.
Step 3: Tap on the “Reset All Settings” option. It will reset the settings, but you will not lose the iPhone’s data. But you may have to re-enter the WiFi password.
Fix 5: Go to Apple Store or Contact Apple Support for Expert Help
If you are unable to understand the iPhone stuck in boot loop problem, then your apple device may have an issue in hardware. You can check the battery connector to find if there is something wrong. If you still can’t understand the reason behind the issue, you can go to the nearest Apple Store to fix the problem.
As any hardware problem may lead to your iPhone malfunction. So, experts at the apple support center can help you to repair it. Once your iPhone gets repaired, reboot the device to get it back in its normal state.
Fix 6: Fix your iPhone Stuck in Boot Loop Issue with iOS System Recovery
If you like to resolve the iPhone stuck-in boot loop issue, the most effective and best way is to use a third-party iOS system recovery tool. One of the best software is Dr.Fone – System Repair (iOS). You can use this tool to fix the issues at home yourself. It is a professional iOS system repair tool that allows you to fix various iOS issues without data loss.
This tool is compatible with all models of iPad, iPhone, iPod touch, and other iOS 15 supported models. It is an easy and user-friendly tool that helps you in iOS system iPhone repair with a few clicks.
Dr.Fone – System Repair allows you to resolve various iOS-related issues in several scenarios like:
- Stuck in Recovery Mode
- White Screen of Death
- iPhone Black Screen
- iPhone Frozen
- iPhone Keeps Restarting
Moreover, you can keep your data intact with this tool. It will allow you to fix the issues without any data loss. What you have to do is simply connect the iPhone and proceed with a few clicks. After that, everything will be done quickly.
Fixing the iPhone Stuck in Boot Loop Issue
Using the Dr. Fone-System Repair tool, you can solve different system problems with a few clicks. It offers the following two optional modes:
Standard Mode
If you choose a Standard Mode, you can fix the iOS system issues without losing the data.
Advanced Mode
If you opt for Advanced Mode, you will be able to fix serious iOS problems. But it will automatically delete all the data on your iPhone.
Though Dr.Fone is not the only tool to fix iOS system issues, it is undoubtedly the easiest and quickest iOS system recovery solution with the highest success rate. Go through the steps listed below:
Step 1: Download Dr.Fone and install it on your system. Then, launch it. Opt for the “System Repair” option to begin the process.
Step 2: Once you enter the System Repair module, there are two optional modes to fix the iPhone stuck boot loop problem. Click on the “Standard Mode.”
Step 3: Enter the correct iOS version in the pop-up window to download its firmware. Then, tap on the “Start” button.
Step 4: Dr.Fone System Repair tool will download the firmware for the device. Ensure that the devices are connected to the computer throughout the process and maintain a stable connection.
Step 5: Once you download the firmware, tap on the “Fix Now” button. Then, the application will fix the iPhone system issue.
Step 6: The iPhone will restart after the process. Then, put it in the normal mode. Then, the screen pops up to check if the iPhone is in a normal state.
Step 7: Disconnect the iPhone safely. Then, use it without a hassle. If there is still an issue, you can tap on the “Try again” button.
Conclusion
Now you have learned different ways to resolve the iPhone boot loop issue. So, next time you have any problems, please feel free to use these fixes or download the Dr.Fone System Repair tool. Get your iPhone boot loop iPhone repaired quickly.
